Drying Solid Wood
It rained heavily last night. The rain had stopped by this morning, but everything outside was still wet, and the humidity was high. I felt it was still too humid to fit the Aruki (sliding panels) or make the top and bottom panels, so I moved on to other work. I haven’t decided how to decorate the 3-sun cube boxes yet, but I’m thinking of keeping the design fairly simple this time. I recently had some time to think about the mechanisms, and I felt that I should offer more variety in those as well.
All the outer panels for these 3-sun cube boxes are made from solid wood this time, so they need to dry thoroughly. I have already made them and set them out to dry. I usually leave the panels a little thicker while they dry, but this time I have planed them to their final thickness first. I don’t normally do this because I need to be careful about discoloration from UV light. However, I thought this would help them dry more thoroughly, so I’m trying it this time. For now, I’m thinking of adding the familiar line design to these solid-wood top and bottom panels. The grain of the strips will run across the grain of the panels to help limit shrinkage. Today, I also prepared the wood for these strips. Of course, these decorative strips are also made of wood, so they can expand and shrink too. They need to dry thoroughly as well. For now, I’m thinking of making these boxes with a 21-steps mechanism. However, I plan to change the usual opening sequence just a little.
The humidity dropped quite a bit this afternoon, so I continued working on the 4-sun boxes. I had hoped to finish them around today, but I’m running a little behind. This is a small batch, so they shouldn’t take much longer. This time, I’m using rosewood veneer for the bottom panels. I choose either walnut or rosewood depending on the materials I have available. I also had a little of the four-color Ichimatsu pattern I used before left over, so I added just four boxes with that design. The rest have the two-color Ichimatsu pattern arranged vertically.
All the outer panels for these 3-sun cube boxes are made from solid wood this time, so they need to dry thoroughly. I have already made them and set them out to dry. I usually leave the panels a little thicker while they dry, but this time I have planed them to their final thickness first. I don’t normally do this because I need to be careful about discoloration from UV light. However, I thought this would help them dry more thoroughly, so I’m trying it this time. For now, I’m thinking of adding the familiar line design to these solid-wood top and bottom panels. The grain of the strips will run across the grain of the panels to help limit shrinkage. Today, I also prepared the wood for these strips. Of course, these decorative strips are also made of wood, so they can expand and shrink too. They need to dry thoroughly as well. For now, I’m thinking of making these boxes with a 21-steps mechanism. However, I plan to change the usual opening sequence just a little.
The humidity dropped quite a bit this afternoon, so I continued working on the 4-sun boxes. I had hoped to finish them around today, but I’m running a little behind. This is a small batch, so they shouldn’t take much longer. This time, I’m using rosewood veneer for the bottom panels. I choose either walnut or rosewood depending on the materials I have available. I also had a little of the four-color Ichimatsu pattern I used before left over, so I added just four boxes with that design. The rest have the two-color Ichimatsu pattern arranged vertically.